Digital Flow Controllers to help reduce wear and tear on 12 v pumps and batteries and to set up the ideal water flow.
This basic model is a simple digital controller to control a pump, with a few extra features added in. Advanced micro Dead End detection and retesting ensures that when the water flow is restricted (eg the pole has become disconnected from the hose, or there is a blockage) the controller shuts down the pump safely, with no pressure build up, allowing you to fix the problem before restarting the system. Advanced battery management, with the battery voltage displayed at the touch of a button, extends the life of the battery and enables the controller to shut down the system if necessary to avoid irreversible damage. This function can be disabled if required; the controller will still display accurate voltage and give a low battery warning. However, we recommend that the override is used only to complete the job in hand and not be left as a permanent setting as running the battery below 10.5 volts for any length of time will result in serious damage. Supplied with full wiring kit, fuses and fuse holders, and full instructions. Easy to use and simple to install Copes easily with demanding daily use Extends life of resin cartridges Controls water flow accurately (0-99) and dependably Advanced micro Dead End detection and retesting Accurate battery voltage testing Low battery cut off override function Unit is sealed to IP65, stopping water ingress